Re: Starter relay mod for '72 Spider

To: [email protected]
Subject: Re: Starter relay mod for '72 Spider
From: "Dean W. Cains" <[email protected]>
Date: Fri, 04 Oct 2002 18:07:46 -0400
Cc: "Paul Irvine" <[email protected]>
Content-type: text/plain; charset="us-ascii"; format=flowed
In-reply-to: <[email protected]>
Reply-to: "Dean W. Cains" <[email protected]>
Sender: [email protected]

Hi Paul:

Any generic 30A SPDT $7 relay should do. I used a Bosch, but there are many similar available at most parts stores. If you prefer a push-button over the original key switch, still use a relay, as either type of switch will benefit from the protection the relay offers. Some recommend using a separate relay to trigger the Spica's cold-start solenoid, but I haven't seen the need.

Regards,

Dean

At 05:05 PM 10/4/2002, you wrote:

Date: Fri, 4 Oct 2002 10:38:19 -0700
From: "Paul Irvine" <[email protected]>
Subject: Starter relay mod for '72 Spider

I know plenty of people have done this mod so thought I'd ask if anyone has
a part number or source for a relay. I'd also consider just installing a
pushbutton rather than a relay. Has anyone done that?

Paul Irvine - Antioch CA
Project Alfa - http://home.pcmagic.net/pi

--
to be removed from alfa, see /bin/digest-subs.cgi
or email "unsubscribe alfa" to [email protected]

Prev by Date: re:Starter relay mod for '72 Spider
Next by Date: re: dreaming of a new spider
Previous by thread: re:Starter relay mod for '72 Spider
Next by thread: Re: Starter relay mod for '72 Spider
Index(es):
- Date
- Thread

Home | Archive | Main Index | Thread Index