Re: Header Torque Spec?

To: "Philip L. A. Hahn" <[email protected]>
Subject: Re: Header Torque Spec?
From: "Daegrigg (Don)" <[email protected]>
Date: Mon, 23 Sep 2002 12:23:46 -0400
Cc: [email protected]
Content-transfer-encoding: 7bit
Content-type: text/plain; charset=iso-8859-1
References: <024e01c2631c$1be287a0$fe00a8c0@philip27hahcia>
Reply-to: "Daegrigg (Don)" <[email protected]>
Sender: [email protected]

----- Original Message -----
From: "Philip L. A. Hahn" <[email protected]>
To: <[email protected]>
Sent: Monday, September 23, 2002 12:13 PM
Subject: Header Torque Spec?


> I looked through my shop manual and couldn't find it. What sort of torque
> should I put on the headers/exhast manifold, where it bolts onto the
engine?
> Or should I just tighten as much as possible?
>
>
> Thanks,
> Philip

The correct torque is 18.8 ft. lbs. per the V6 shop manual.  You don't
specify car but I would not think the four cylinder torque should be any
different.

Don

> --
> to be removed from alfa, see /bin/digest-subs.cgi
> or email "unsubscribe alfa" to [email protected]
--
to be removed from alfa, see /bin/digest-subs.cgi
or email "unsubscribe alfa" to [email protected]

References:
- Header Torque Spec?
  - From: "Philip L. A. Hahn" <[email protected]>

Prev by Date: Pt. 2
Next by Date: Milano Alternator Fun
Previous by thread: Header Torque Spec?
Next by thread: Pt. 2
Index(es):
- Date
- Thread

Home | Archive | Main Index | Thread Index