1600 Engine won't start

To: [email protected]
Subject: 1600 Engine won't start
From: [email protected]
Date: Sun, 15 Sep 2002 09:51:34 EDT
Content-transfer-encoding: 7bit
Content-type: text/plain; charset="US-ASCII"
Reply-to: [email protected]
Sender: [email protected]

I have a 1969 Spider with a 1600 engine with a two barrel Weber carb.  I 
replaced the head gasket which was bad.  After reassemble of the engine I 
have not been able to get the engine to start.  Engine backfires through the 
carb.  Seems to be a timing issue.  Also this engine has only one timing mark 
on the engine pulley, TDC I think.  Anyone have any suggestions to the 
problem.  Also I need the lower clutch cover for the drive train.

[email protected]
1969 spider
--
to be removed from alfa, see /bin/digest-subs.cgi
or email "unsubscribe alfa" to [email protected]

Follow-Ups:
- Re: 1600 Engine won't start
  - From: James Montebello <[email protected]>

Prev by Date: 2 liter valve shims
Next by Date: Sports Sedan
Previous by thread: 2 liter valve shims
Next by thread: Re: 1600 Engine won't start
Index(es):
- Date
- Thread

Home | Archive | Main Index | Thread Index