Re: Mounting a V 6 to an engine stand

["Chris Landry" <CSL5@domain.elided>]

It will bolt right up IF you take the flywheel off.  If not, you need
clearance for the long studs on the flywheel.  I went to a scrap metal place
and picked up a short length of 6x6 square tube for $2.  A little bit with a
torch and a welder and I had adapters to mount the engine with flywheel
clearance.  One of those same adapters is now being used to hang my son's
RX7 motor off the same stand.  Not bad for $2!

Chris
84 GTV6

>
> Date: Mon, 26 Aug 2002 10:42:43 -0700
> From: "Paul Irvine" <pi@domain.elided>
> Subject: Re: Mounting a V 6 to an engine stand
>
> John De Trana  wrote:
>
> Does anyone have any experience in mounting a gtv 6
> 2.5 liter v6 to an engine stand?  Will I need any sort
> of adapter to do that?
>
> No adapter needed, it will bolt right up.
>
> Paul Irvine - Antioch CA
> Project Alfa - http://home.pcmagic.net/pi
--
to be removed from alfa, see /bin/digest-subs.cgi
or email "unsubscribe alfa" to majordomo@domain.elided