Re: POR-15

To: [email protected]
Subject: Re: POR-15
From: Joe Elliott <[email protected]>
Date: Tue, 13 Aug 2002 16:50:06 -0400
Content-disposition: inline
Content-transfer-encoding: 7bit
Content-type: text/plain; charset=us-ascii; format=flowed
In-reply-to: <[email protected]>
Reply-to: Joe Elliott <[email protected]>
Sender: [email protected]

Anyone care to give me the scoop on this POR stuff? I'm considering getting some, and was wondering what I need to be aware of. Application procedures? Shelf life? Etc. Thanks.

--On Tuesday, August 13, 2002 8:25 PM +0000 alfa-digest <[email protected]> wrote:

Date: Tue, 13 Aug 2002 13:48:55 -0400
From: Mark Denovich <[email protected]>
Subject: Re: Rust removal

I've used this technique before, it works very well.   For less rusty
parts submersion in a vinegar and salt solution for a while works well
too.   Just be sure to clean and oil/paint ASAP when you're done
cleaning or you'll be back to square one very quickly.  I like using
some metal prep (a phosphoric acid solution) followed by POR-15 (an
epoxy like paint.)

	--Mark

Ed Lutz wrote:

I just came across this page on the web and thought it might be of
interest to someone here.

http://www.oldengine.org/members/billd/electrol.htm

--
to be removed from alfa, see /bin/digest-subs.cgi
or email "unsubscribe alfa" to [email protected]

Follow-Ups:
- Re: POR-15
  - From: Mark Denovich <[email protected]>

Prev by Date: Spider Heater woes
Next by Date: RE: New word for today
Previous by thread: POR-15
Next by thread: Re: POR-15
Index(es):
- Date
- Thread

Home | Archive | Main Index | Thread Index