Re: She cannah take tha' mooch pawr-r-r, Cahptain!

[Joe Elliott <jee@domain.elided>]

http://www.talbotco.com sells connectors that, for $10 each, damn well 
better be ceramic.  You should also be able to get them at your local auto 
parts chain for a few bucks, but the ones I got at AutoZone don't actually 
fit (the pins are too close together)!!  But if you've got your old plugs, 
you can release the actual connectors, and release the new ones from the 
ill-fitting AutoZone ones, and clip the new connectors from AutoZone into 
your old plugs.  I hope that makes sense, but I really don't know how to 
distinguish between the plasitc connector that hold the two (or three) 
wires (which I've called a "plug") and the female spade connectors which 
I've called connectors that clip into the plastic "plug."

--On Tuesday, August 6, 2002 6:00 PM +0000 alfa-digest 
<owner-alfa-digest@domain.elided> wrote:


> The 12 g wire runs all the way to the H1 high-beam bulbs, it's not
> spliced. On the H4 hi/lo bulbs it is spliced down to the 14 g wire that
> was in the plug, as I have not yet found the large size female connectors
> needed.  Once I do I'll eliminate the splices.  Any recommendations on a
> source?
--
to be removed from alfa, see /bin/digest-subs.cgi
or email "unsubscribe alfa" to majordomo@domain.elided