Coolant In Spark Plug Wells

To: <[email protected]>
Subject: Coolant In Spark Plug Wells
From: "Kurt Incledon" <[email protected]>
Date: Sat, 3 Aug 2002 10:00:31 -0700
Content-transfer-encoding: 7bit
Content-type: text/plain; charset="Windows-1252"
Reply-to: "Kurt Incledon" <[email protected]>
Sender: [email protected]

I appear to have coolant in the #2 & 3 plug wells in my 86 Spider, upon
inspection I noticed that the PO and/or his mechanic, failed to replace the
hoist mount on the cylinder head when rebuilding it. Replaced them with 2
thin washers on the head nuts between #2 & 3.
Question is, could this be the culprit? What kind of damage could have been
done to the head gasket?
All replies please.
Off to find a compression gauge.
Kurt
86 Spider
87 Milano
--
to be removed from alfa, see /bin/digest-subs.cgi
or email "unsubscribe alfa" to [email protected]

Follow-Ups:
- RE: Coolant In Spark Plug Wells
  - From: "TJ" <[email protected]>

Prev by Date: Re: flywheel alignment
Next by Date: GTV-6 ignition switch differences
Previous by thread: Re: flywheel alignment
Next by thread: RE: Coolant In Spark Plug Wells
Index(es):
- Date
- Thread

Home | Archive | Main Index | Thread Index