Pump question?

To: [email protected]
Subject: Pump question?
From: FERDINANDO DI MATTEO <[email protected]>
Date: Wed, 31 Dec 1969 20:30:48 -0500
Cc: [email protected]
Content-type: text/plain; charset="us-ascii"
Reply-to: FERDINANDO DI MATTEO <[email protected]>
Sender: [email protected]

Don,  The pump does not run with ignition switch on, engine not 
running.  Safety feature in case of roll over or bad accident to prevent 
fuel spill engine off.  The air flow meter has a switch to jeep the pump 
running after engine starts.  Check for power in the brown wire from 
ignition switch when you let go the key after start attempt.  No power 
there, ignition switch failure.  Fred Di Matteo  AROC Technical Advisor 
in Fort Myers, Florida
--
to be removed from alfa, see /bin/digest-subs.cgi
or email "unsubscribe alfa" to [email protected]

Prev by Date: RE: Headers cause emissions changes, why?
Next by Date: No start cars advice by Di Matteo
Previous by thread: Re: radio relay
Next by thread: No start cars advice by Di Matteo
Index(es):
- Date
- Thread

Home | Archive | Main Index | Thread Index