RE: Understanding the use of fusesm Di Matteo

To: [email protected]
Subject: RE: Understanding the use of fusesm Di Matteo
From: "Weiss, Jeffrey" <[email protected]>
Date: Fri, 19 Jul 2002 16:04:48 -0400
Content-type: text/plain; charset="iso-8859-1"
Reply-to: "Weiss, Jeffrey" <[email protected]>
Sender: [email protected]

FERDINANDO DI MATTEO wrote:
> ...To determine a fuse size, when the value is unknown, simply just 
> insert an ammeter in place of the fuse and read the current draw in 
> amps....

Assuming the circuit is operating properly, right?  I wouldn't want
to size a fuse for a circuit based on a measurement of draw if, for
example, there's a near-short present.

Lesseeee...drawing 95 amps, so a 100-amp fuse oughtta do it...
--
jw
--
to be removed from alfa, see /bin/digest-subs.cgi
or email "unsubscribe alfa" to [email protected]

Prev by Date: 105 Radios
Next by Date: Cheap (inexpensive) O2 Sensor site
Previous by thread: Understanding the use of fusesm Di Matteo
Next by thread: Looking for a car-- low Alfa content
Index(es):
- Date
- Thread

Home | Archive | Main Index | Thread Index