RE: Spider clutch pedal

["Ian Lomax" <sfalfisto@domain.elided>]

Check the pin that connects the pedal assembly to the clutch master
cylinder.  Mine was worn into an oval shape, resulting in lots of slop in
the pedal.

My clutch arm has the weld as well, and as far as I know is the original arm
from 1971, with over 200k miles on it.

Cheers,
Ian Lomax
71 Spider
SF, CA

-----Original Message-----
From: owner-alfa@domain.elided [mailto:owner-alfa@domain.elided]On Behalf Of
Russ Tine
Sent: Thursday, July 18, 2002 6:35 PM
To: alfa-digest@domain.elided
Subject: Spider clutch pedal


Hi, I know there has been discussion in the past
regarding the weld on Spider clutch pedal. Now that I
am rebuilding the assembly, I just wanted to be sure
of what I am looking at. Unless there has been a
previous repair, it appears that the clutch pedal is
welded to the pivot about an inch below the shaft. Is
this a repair, or is this the way it was made?
I will be replacing both master cylinders, anything
else I should do while I am in here?

Thanks,
Russ Tine
75 Spider
87 Milano
Yahoo! Autos - Get free new car price quotes
http://autos.yahoo.com
--
to be removed from alfa, see /bin/digest-subs.cgi
or email "unsubscribe alfa" to majordomo@domain.elided
--
to be removed from alfa, see /bin/digest-subs.cgi
or email "unsubscribe alfa" to majordomo@domain.elided