Re: GTV6 rear rotor bolts

[Mark Denovich <mark@domain.elided>]

Richard Bies wrote:

> (There is a temptation to fit Milano socket-head cap screws -- but there
> is also an access problem with these...)
If you can find them...   Neither McMaster-Carr nor MSC were able to 
find (if I remember correctly) M8x1.0 socket head cap screws (just 
checked MetricSpecialties too).   I had destroyed two of mine trying to 
remove them.   A friendly digester gave me two from a parted Milano to 
replace mine.

In any case, make sure you put some thread locker on those bolts.  They 
can vibrate loose, it's no fun shooting a brake rotor out the back at 
65mph.   Ask me how I know.  *sigh*

	--Mark
--
to be removed from alfa, see /bin/digest-subs.cgi
or email "unsubscribe alfa" to majordomo@domain.elided