GTV6 alignment (camber problem)

To: [email protected]
Subject: GTV6 alignment (camber problem)
From: Robert Abatecola <[email protected]>
Date: Fri, 7 Jun 2002 09:00:09 -0700
Content-type: text/plain; charset="us-ascii" ; format="flowed"
Reply-to: Robert Abatecola <[email protected]>
Sender: [email protected]

Greetings fellow Alfa nuts (and bolts).

The camber on my 1985 GTV6 is slightly out of spec and can't be adjusted properly anymore. It's a little too negative. Someone correct me if I'm wrong about this... the only camber adjustment I'm aware of on the GTV6 is by way of adding or removing shims. Adding shims makes it MORE negative. Unfortunately, my car has no shims installed so I'm stuck with overly negative camber.

Is there a fix for this? (hopefully one that does not involve grinding away at something)

Thanks!
--

-Robert Abatecola, San Jose, CA
1985 GTV6
1987 Spider Quadrifoglio
--
to be removed from alfa, see /bin/digest-subs.cgi
or email "unsubscribe alfa" to [email protected]

Prev by Date: nutty pedantry (was: 2000 crank pulley nut size)
Next by Date: Re: Canvas Top Question
Previous by thread: nutty pedantry (was: 2000 crank pulley nut size)
Next by thread: re: GTV6 alignment (camber problem)
Index(es):
- Date
- Thread

Home | Archive | Main Index | Thread Index