re: 164 intermediate bearing

To: [email protected]
Subject: re: 164 intermediate bearing
From: Richard Bies <[email protected]>
Date: Sat, 4 May 2002 11:38:03 -0400 (EDT)
Cc: [email protected]
Content-type: TEXT/PLAIN; charset=US-ASCII
In-reply-to: <[email protected]>
Reply-to: Richard Bies <[email protected]>
Sender: [email protected]

> what's an intermediate bearing?  are you referring to the tranny's input shaft bearing?  i yust got one of those...  the transmission comes out, then it gets pulled apart to install a relatively cheap part...  diy, or checkbook - either way, quite painful...  ;~)
>
> doug s., w/herky, jerky 164, whined a long time before getting herky-jerky
>
The 164 has an intermediate shaft, with a carrier bearing (carried in the
same bracket with the rear motor mount).

rmb
--
to be removed from alfa, see /bin/digest-subs.cgi
or email "unsubscribe alfa" to [email protected]

Follow-Ups:
- Re: 164 intermediate bearing
  - From: Bernie & Diana Bennett <[email protected]>

References:
- re: 164 intermediate bearing
  - From: [email protected]

Prev by Date: Re: alfa-digest V8 #695
Next by Date: Engine recycling
Previous by thread: re: 164 intermediate bearing
Next by thread: Re: 164 intermediate bearing
Index(es):
- Date
- Thread

Home | Archive | Main Index | Thread Index