Re: Need oddball screw

To: <[email protected]>
Subject: Re: Need oddball screw
From: "Thomas Washburn" <[email protected]>
Date: Tue, 23 Apr 2002 01:12:43 -0700
Content-transfer-encoding: 7bit
Content-type: text/plain; charset="iso-8859-1"
In-reply-to: <[email protected]>
Reply-to: "Thomas Washburn" <[email protected]>
Sender: [email protected]

Biba <[email protected]> wrote:

> Henry Kim is looking for  four 4 x 60 phillips oval head machine 
> screws for headlight aiming.
> 
> I first thought you simply left out a decimal in the 60 but 
> realized a 'standard' 4 mm screw invariably has a pitch of 0.75. 
> There is a metric pitch of 0.6 but...?

The usual pitch on 4mm screws is 0.7mm.  By "4 x 60" I'd say Henry
is looking for an M4x0.7 with a nominal length of 60mm.

-Tom

FWIW, MSC carries M4x0.7 x 50mm Phillips round-head machine screws.
I didn't see any 60s in the catalog.
--
to be removed from alfa, see /bin/digest-subs.cgi
or email "unsubscribe alfa" to [email protected]

Prev by Date: Re: Happiness is a warm... wrench? (long)
Next by Date: RE: warning on possible virus
Previous by thread: Need oddball screw
Next by thread: Re GTV FS - location
Index(es):
- Date
- Thread

Home | Archive | Main Index | Thread Index