RE Torsion bar removal

["Jim Boniface" <jeboniface@domain.elided>]

Instead of working on your back,it's a simple procedure to
remove the torsion bar carrier. After the A-arms are removed, simply remove
the two 19mm
bolts holding the carrier to the frame and the two bars with the
carrier can be slid out. Mine came out even with the exhaust in place.
Then one can use the BFH with much more effectiveness.
PS. Those stock bars are utterly worthless now that they have been
heated up.  But they do make good pry bars.

Jim Boniface
jeboniface@domain.elided

--
to be removed from alfa, see /bin/digest-subs.cgi
or email "unsubscribe alfa" to majordomo@domain.elided