'78 Spider Clutch problem SOLVED!

[JeffreyOlson@domain.elided]

Adjusted the clutch M/C pushrod length to the 134MM 
specified and re-bled the system using a pressure 
bleeder.

DEFINITE IMPROVEMENT!  I may tweek the adjustment a bit 
more after replacing the cotter pin.  The cotter pin at 
the M/C is very worn allowing movement at the pivot arm 
but all else is good.

Thanks for the info...I think I'll keep a spare clutch 
M/C and pivot lever around just-in-case!

Jeff

--
to be removed from alfa, see /bin/digest-subs.cgi
or email "unsubscribe alfa" to majordomo@domain.elided