Oil Pressure Sending unit

To: Alfa-Digest <[email protected]>
Subject: Oil Pressure Sending unit
From: Andrew Garcia <[email protected]>
Date: Mon, 26 Nov 2001 10:41:11 -0600
Content-transfer-encoding: 7bit
Content-type: text/plain; charset=Windows-1252
Reply-to: Andrew Garcia <[email protected]>
Sender: [email protected]

	Joel asked about how to tighten a new oil pressure sending unit. Well most
have a 14 mm hex on the bottom side. I chopped a inexpensive 14 mm wrench
and you now have a custom tool. Lately I have also seen these with a 17 mm
hex. Most of the tool suppliers now have stubby metric wrenches for those
hard to reach places. Good Luck.

	ANDREWG
	Houston, TX

--
to be removed from alfa, see /bin/digest-subs.cgi
or email "unsubscribe alfa" to [email protected]

Prev by Date: Torsion Bar rates
Next by Date: re: Normal/deep oil sumps
Previous by thread: Torsion Bar rates
Next by thread: Re: Viotti woody wagons
Index(es):
- Date
- Thread

Home | Archive | Main Index | Thread Index