RE: Brembo on 82 GTV6?

To: "Michael S. Sweigart" <[email protected]>, <[email protected]>
Subject: RE: Brembo on 82 GTV6?
From: "Brian Shorey" <[email protected]>
Date: Sat, 3 Nov 2001 18:32:18 -0500
Content-transfer-encoding: 7bit
Content-type: text/plain; charset="us-ascii"
In-reply-to: <[email protected]>
Reply-to: "Brian Shorey" <[email protected]>
Sender: [email protected]

> Are Brembo front calipers stock for an 82 GTV6? Why would there be 2 wires
> coming out of the caliper on the right one? The 2 wires were cut short at
> the caliper so I am guessing this is some type of pad-wear dummy light
> activator.

Both of my '82 Baloccos have Brembo calipers.

Are you sure the wires are coming out of the calipers?  Most pad wear
sensors I've seen use wires embedded in the pads (not the calipers).
Somebody probably used Milano pads in your GTV6, and cut the wires off
because they were not needed.

bs

--
to be removed from alfa, see /bin/digest-subs.cgi
or email "unsubscribe alfa" to [email protected]

References:
- Brembo on 82 GTV6?
  - From: "Michael S. Sweigart" <[email protected]>

Prev by Date: Alfa 164 Body Cladding
Next by Date: Re:164 Tyre Wear
Previous by thread: Brembo on 82 GTV6?
Next by thread: Alfa 164 Body Cladding
Index(es):
- Date
- Thread

Home | Archive | Main Index | Thread Index